By Catarina Borngen. Fireplace. Published at Thursday, September 20th, 2018 - 01:21:59 AM.
For instance, a homeowner decides to build a marble mantle seven feet wide and four feet high. The budget takes into account the marble tile to finish the design and the firebox, structural materials to build the fireplace and labor. Most people do not look at a chimney and think "Wow, that is a great looking chimney" so we do not always account for the ventilation when we design our perfect outdoor accent. The ventilation cannot be skipped just because there is plenty of ventilation outdoors. The proper flue will "pull" the fumes and smoke up and away from the fireplace. Without the vent gas fumes will flow from the front of the fireplace and the area usually reserved for sitting in front of the fire will be hot and smelly. The homeowner contacts a contractor who explains the chimney, flue and roof termination will double the budget.
This said however, in any wood burning fireplace it is vital to use the right kind of wood that is cut to a convenient size. Hardwoods such as oak or fruitwood are the best option as they give off the most heat. Softwoods such as birch give off a good heat but tend to be consumed pretty quickly, while pine contains a lot of spark forming resin that can spit all over your floor or rug. Ideally, logs should measure between 9 and 14 inches long although it doesn’t hurt to use a couple of larger logs on your fire to give it a bit of character. Only ever use seasoned wood in your fireplace. If you try to burn green wood the heat produced by combustion must dry the wood before it will burn and you risk a buildup of creosote in your chimney which creates an imminent fire hazard. In addition by using well seasoned wood you will you get a much hotter fire; thus creating more heat for your home. It is worth bearing in mind that all wood for burning should be seasoned for a minimum of six months and stored under cover, so it is best to buy and stack firewood well in advance of the coldest months.
You just have to know the precise measurement of your fireplace and you can find a fireplace screen that fits. If you are into traditional type, you should go for the metal fireplace screen. Brass, steel, aluminum and iron are some of the most popular metals used in fireplace screen. Most of these metal screens have a mesh screen that helps prevent ash and sparks from flying. You must remember that metal screens can reach extreme temperature so it is best to be cautious and avoid touching them. There are also stained glass types of fireplace screens and these types come with lead and wooden frames.
Though having a fireplace can complete the overall look of your home and add warmth to the whole area, you cannot ignore the risk of starting a fire. This accident can happen when a log or an ember falls to the carpet or the furnishings and when a spark jumps out of the fireplace. In order to prevent these accidents, it is recommended to have a fireplace screen. Aside from its safety purpose, a fireplace screen can add beauty to your fireplace as well as to your home. Most fireplace screens are made from different materials such as steel, cast iron and other hard metals that have the ability to bear extreme heat from the fireplace. The fireplace screen is designed in a way that they can prevent the logs, sparks and embers to leave the fireplace. Fireplace screens are important as they can lessen the risk of having a fire. A screen for the fireplace is divided into two sections - the outer part has the decorative design while the inner part has small holes on the screen. These tiny holes prevent the sparks and embers from leaving and also let air pass, allowing the fire to burn more.
Any content, trademark’s, or other material that might be found on the Fireplace website that is not Fireplace’s property remains the copyright of its respective owner/s. In no way does Fireplace claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.